Res. Agr. Eng., 2006, 52(3):115-122 | DOI: 10.17221/4887-RAE

Influence of overlay layers on the abrasive wear

P. Hrabě1, R. Chotěborský1, R. Medlín2
1 Department of Material and Engineering Technologies, Technical Faculty, Czech University of Agriculture in Prague, Prague, Czech Republic
2 New Technologies - Research Centre in Westbohemian Region, Pilsen, Czech Republic

A problem of machine parts wear decrease and in this way of the economical effectiveness of rapid wearable parts interferes with majority of manufacturing processes. Service life and operating reliability of a great number of machine parts is largely influenced by friction and wear, which take a significant part in the power and material losses. Wear affects significantly the maintenance, repair and renewal costs of machine parts, too. Today we can use a row of overlay materials. They differ above all by chemical composition, which determinates the conditions of use. Next conditions are the solidification of the welded-on material and the diffusion ability of main alloying elements, which determine the resultant structure of an overlay. The paper intents on multilayer overlays problem and on the number of overlay layers influence on abrasive wear.

Keywords: abrasive wear; abrasive particle; overlay materials; functional surfaces; abrasive cloth

Published: September 30, 2006  Show citation

ACS AIP APA ASA Harvard Chicago Chicago Notes IEEE ISO690 MLA NLM Turabian Vancouver
Hrabě P, Chotěborský R, Medlín R. Influence of overlay layers on the abrasive wear. Res. Agr. Eng. 2006;52(3):115-122. doi: 10.17221/4887-RAE.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open full article

    References

    1. Avient J., Goddard J., Wilman H. (1960): An experimental study of friction and wear. Proceedings of Royal Society of London, Series A, Mathematical and Physical Sciences, 258: 159-179. Go to original source...
    2. Blaškovič P., Balla J., Dzimko M. (1990): Tribológia. Alfa, Bratislava.
    3. Brožek M. (2001): Mísení materálů při navařování. Agrotech Nitra, 46-50.
    4. ČSN 01 5050 (1968): Opotřebení materiálu - názvosloví. Český normalizační institut, Praha.
    5. ČSN 01 5084 (1973): Stanovení odolnosti kovových materiálů proti abrazívnímu opotřebení na brusném plátně. Český normalizační institut, Praha.
    6. Herák D. (2005): Mechanické variátory otáček pro přenášený výkon 0 až 50 kW. [Dizertační práce.] TF, ČZU Praha.
    7. Hrabě P., Chotěborský R. (2004): Návary a jejich využití v praxi. MM Průmyslové spektrum, č. 12: 57.
    8. Pošta J., Havlíček J., Černovol M.I. (1991): Renovace strojních součástí. MF, VŠZ Praha.
    9. Ptáček L. (2001): Nauka o materiálu. CERM s.r.o.,Brno.
    10. Suchánek J., Blaškovič P., Brožek M. (1999): Abrasion resistance of selected hardening materials. In: Trends in Agricultural Engineering. Technical Falculty, CUA Prague, 606-610.
    11. Svanson P.A. (1993): Review of Laboratory Abrasion Test. Tribology: Wear Test Selection for Design and Application. ASTM STP 1199, Philadelphia.
    12. Vnouček M. (2001): Povrchové efekty při GDOES. [Dizertační práce.] ZČU, Plzeň.
    13. Vocel M., Dufek V. et al. (1976): Tření a opotřebení strojních součástí. SNTL, Praha.

    This is an open access article distributed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International (CC BY NC 4.0), which permits non-comercial use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.


    Return to the content