Res. Agr. Eng., 2003, 49(1):27-31 | DOI: 10.17221/4948-RAE
Properties of threads created by thread inserts
- Czech University of Agriculture, Prague, Czech Republic
Several techniques are at disposal for production or repair of internal threads. The repair of threads by means of flexible thread inserts and the repair of threads by means of sold thin walled thread inserts belong to the most important ways. The properties of threads repaired using flexible and solid thin-walled thread inserts were experimentally verified and compared. Laboratory comparison of loading capacity of the threads according to observance of specified technological procedures was carried out. Durability and reliability of the repaired threads were verified in operation, while the threads endured long-time variable mechanical and temperature load.
Keywords: internal thread; flexible thread insert; solid thread insert; loading capacity of thread; thread reliability
Published: March 31, 2003 Show citation
References
- Blaue Seiten, das Handbuch der Verbindungstechnik, 1996. Böllhoff Gmbh, 5. Auflage: 1516. http://www.boellhoff.cz http://www.wuerth.cz
- POŠTA J., 1998. Operativní opravy strojů a zařízení. Met. Zeměd. Praxi 2/98. Praha, ÚZPI: 45.
- Technik Rund um Schrauben, 1987. Wilhelm Böllhoff Gmbh, 2. Auflage: 123.
- TOLNAI R., ČIČO P., KOVÁČ I., 2001. Tribologické špecifiká v oblasti poľnohospodárskej a lesníckej techniky. In: Zbor. z medzinár. ved. konf. Trendy lesníckej, drevárskej a environmentálnej techniky a jej aplikácie vo výrobnom procese. Zvolen, TU: 107.
- VESELÝ P., 2002. Oprava vnitřních závitů pomocí závitových vložek. [Diplomová práce.] Praha, ČZU: 79.
This is an open access article distributed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International (CC BY NC 4.0), which permits non-comercial use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.