Res. Agr. Eng., 2005, 51(2):63-65 | DOI: 10.17221/4904-RAE
Facilities of optimization of car parts in cad system pro/engineer
- Faculty of Mechanical Engineering, Technical University in Liberec, Liberec, Czech Republic
New methods covered in this contribution describe the behavior of modeling algorithms that can be added to the parts and their assembly in the input data dependents. These input conditions could be of various types - dimensions, forces, moments, temperature and friction. The method includes the setting of requirements, combination of requirements, test of feasibility and test of sensibility. For consideration of user defined conditions of geometric and mass optimization can be made. Behavior modeling is a new programming product, which can stay as a part of CAD systems.
Keywords: CAD system; behavior modeling; computer models; machine parts; optimization
Published: June 30, 2005 Show citation
References
- Parametric Technology Corporation, Pro/Engineer 2003: User guide - modeling.
- VONDØICH J., JIRKÙ S., 2000. Applications of Modeling of Machine Systems and Simulations of Their Operating Behaviour. In: Modelling, Identification and Control. Calgary: IASTED, 1: 615-618.
- MECHSOFT. COM: User guide - Behaviour Modeling in PRO/ENGINEER.
This is an open access article distributed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International (CC BY NC 4.0), which permits non-comercial use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.