Res. Agr. Eng., 2006, 52(3):81-86 | DOI: 10.17221/4883-RAE

Impact induced mechanical damage of Agria potato tubers cultivated in different regimes

J. Blahovec1, A. Hejlová1, J. Vacek2
1 Technical Faculty, Czech University of Agriculture in Prague, Prague, Czech Republic
2 Potato Research Institute, Havlíčkův Brod, Czech Republic

The Agria potato tubers were grown in 2005 in cultivation regimes involving different irrigation and fertilisation levels and forms. The impact induced tuber damage was simulated dynamically by an impact pendulum test and studied with the aim to detect some relationship between the cultivation regimes and the type and extent of the damage. The usual bruising presented as black spots is in many cases masked by other mechanisms of damage, e.g. by tuber cracking and/or crushing. The highest degree of tuber cracking and at the same time the least frequent bruising were observed for tubers cultivated in the regime with irrigation and without fertilising. The bruising was more pronounced in the narrower tuber side in comparison to the wider flat side in all cultivation regimes. Some results could be compared with similar previous measurements performed on tubers from the same field experiment organised during three successive years 2003-2005. The flatter side parts of the Agria tubers are more sensitive to bruising than the more oblique ones. The bruise spot shape depends mainly on its dimension. The role of different cultivation regimes can be interpreted in this way.

Keywords: potato; density; stem; bud; cultivation regime; impact; bruising; cracking; crushing; irrigation; fertilisation

Published: September 30, 2006  Show citation

ACS AIP APA ASA Harvard Chicago Chicago Notes IEEE ISO690 MLA NLM Turabian Vancouver
Blahovec J, Hejlová A, Vacek J. Impact induced mechanical damage of Agria potato tubers cultivated in different regimes. Res. Agr. Eng. 2006;52(3):81-86. doi: 10.17221/4883-RAE.
Download citation

References

  1. Baritelle A., Hyde G.M., Thornton R., Bajema R. (1999): A classification system for impact related defects in potato tubers. In: Proc. 38th Annual Washington State Potato Conference & Trade Fair.
  2. Blahovec J. (2005a): Density and shape characteristics of Agria tubers cultivated at different conditions. Research in Agricultural Engineering, 51: 1-6. Go to original source...
  3. Blahovec J. (2005b): Impact induced mechanical damage of Agria potato tubers. Research in Agricultural Engineering, 51: 39-43. Go to original source...
  4. Blahovec J. (2006): Shape of bruise spots in impacted potato. Postharvest Biology and Technology, 39: 278-284. Go to original source...
  5. Blahovec J., Židová J. (2004): Potato bruise sensitivity dependence on regimes of cultivation. Research in Agricultural Engineering, 50: 89-95. pear bruising in a group of varieties. Scientia Agriculturae Bohemica, 34: 140-145. Go to original source...
  6. Blahovec J., Mareš V., Paprštein F. (2004): Static and dynamic tests of pear bruise sensitivity. Research in Agricultural Engineering, 50: 54-60. Go to original source...
  7. Holt J.E., Schoorl J. (1977): Bruising and energy dissipation in apples. Journal of Texture Studies, 7: 421-432. Go to original source...
  8. Johnson N.N. (1987): Contact Mechanics. Cambridge University Press, Cambridge.
  9. Molema G.J. (1999): Mechanical force and subcutaneous discolouration in potato. [PhD Thesis.] Wageningen Universiteit, Wageningen.
  10. Noble R. (1985): The relationship between impact and internal bruising in potato tubers. Journal of Agricultural Engineering Research, 32: 111-121. Go to original source...

This is an open access article distributed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International (CC BY NC 4.0), which permits non-comercial use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.