Res. Agr. Eng., 2007, 53(4):161-165 | DOI: 10.17221/1952-RAE
Parametres of energy crop biomass handling
- Research Institute of Agricultural Engineering, Prague-Ruzyně, Czech Republic
Energy crop handling can be performed with standard handling machinery equipped with suitable adaptors. The authors describe and compare various types of handling of wood and herb energy crops. The published results have been gained by field measurements in operating conditions and calculated on the basis of bulk weight. Particular handling variants are supplemented with rough values of unit costs obtained by model calculation.
Keywords: handling; energy crops; renewable resources; biomass
Published: December 31, 2007 Show citation
References
- Kára J. (2006): Obnovitelné zdroje energie a situace v ČR. Mechanizace zemědělství, 54: 27-33. Kára J., Souček J., Adamovský R., Polák M. (2007): Logistika bioenergetických surovin. Redakčně upravená zpráva projektu QF4079, číslo zprávy VÚZT: Z - 2469. VÚZT Praha.
- Souček J., ©perl M. (2006). Parametry dopravy a manipulace balíkové slámy. Mechanizace zemědělství, 54: 32-34.
Go to original source... - Souček J., Hanzlíková I., Hutla P. (2003): A fine desintegration of plants suitable for composite biofuels production. In: Agricultural Ingeneering. Institute of Agricultural and Food Information, 1/03, 7-11. Go to original source...
- Syrový O. (1983): Racionalizace manipulace s materiálem v zemědělství. SZN, Praha.
This is an open access article distributed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International (CC BY NC 4.0), which permits non-comercial use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.