Res. Agr. Eng., 2009, 55(1):29-34 | DOI: 10.17221/17/2008-RAE

Degradation processes influencing bonded joins

M. Müller, R. Chotìborskı, P. Hrabì

Degradation processes cause huge material and economic losses all over the world. On one hand, in today's globalised society, various climatic changes occur affecting products in different ways. On the other hand, different specific degradation media exist in specific branches of the human activity. Due to the influence of the degradation environment (media), destruction can set in. The aim of the laboratory experiments was to evaluate the influence of the degradation environment occurring mainly in agriculture. The adhesive bond strength properties as well as the influence on adhesive bonded materials were evaluated. For the degrading environment tested, a natural and an artificial fertilisers, machine oil, and water were selected. Also, the influence of corrosion was tested on the bonded material. The surfaces of adhesive materials debased by corrosion inevitably stop fulfilling their functions. The degree of the corrosion effect depends mainly on the type, the material structure, and of course, on the corrosion environment.

Keywords: bonding; bonding technology; degradation; testing of adhesive bonds

Published: March 31, 2009  Show citation

ACS AIP APA ASA Harvard Chicago Chicago Notes IEEE ISO690 MLA NLM Turabian Vancouver
Müller M, Chotìborskı R, Hrabì P. Degradation processes influencing bonded joins. Res. Agr. Eng. 2009;55(1):29-34. doi: 10.17221/17/2008-RAE.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open full article

    References

    1. Arnott D.R., Wilson A.R., Rider A.N., Lambrianidis L.T., Farr N.G. (1992): Studies of the degradation of metal-adhesive interfaces with surface analysis techniques. Applied Surface Science, 70/71: 109-113. Go to original source...
    2. ÈSN EN 1465 (1997): Adhesives - Determination of Tensile Lap-shear Strength of Rigid-to-rigid Bonded Assemblies. Czech Standard Institution, Prague. (in Czech)
    3. ÈSN ISO 10365 (1995): Adhesives - Designation of Main Failure Patterns. Czech Standard Institution, Prague. (in Czech)
    4. Firm Materias (2007): Epoxy Adhesives BISON.
    5. Mohyla M. (1995): Technology of Metal Surface Treatments. 1. Ed., V©B, Ostrava. (in Czech) Engineering, Prague. (in Czech)
    6. Richter R., Hlu¹ek J., Ryant, P., Lo¹ák T. (2002): Organic fertilizers and their position in the agriculture. Available at http://www.mendelu.cz/user/ryant/publikace/Organicka_hnojiva_02.htm. (accessed June 26, 2008) signing a simple lap adhesive point. Journal of Adhesive Go to PubMed...
    7. Science, 14: 851-858.

    This is an open access article distributed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International (CC BY NC 4.0), which permits non-comercial use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.


    Return to the content