Res. Agr. Eng., 2012, 58(2):66-72 | DOI: 10.17221/12/2011-RAE

Influence of moisture content and loading orientation on some mechanical properties of Mucuna flagellipes nut

N.A. Aviara, O.A. Onuh, S.E. Ehiabhi
Department of Agricultural and Environmental Resources Engineering, University of Maiduguri, Maiduguri, Nigeria

The effects of moisture content and loading orientation on some strength properties of Mucuna flagellipes nut namely, bioyield, yield and rupture points; bioyield, compressive and rupture strengths; and moduli of elasticity, resilience, toughness and stiffness were determined at lateral and longitudinal axial loading, using a Testometric Universal Testing Machine (UTM). In the moisture range of 3.38-10.7% (d.b.), bioyield, yield and rupture points of the nut decreased from 1,137 to 755 N, 1,157 to 790 N and 685 to 365 N, respectively, when loading was on the lateral axis, and increased from 1,090 to 1,888 N, 1,092 to 1,918 N and 420 to 1,215 N on longitudinal loading. Bioyield strength (1.83-1.41 N/mm2), compressive strength (1.85-1.44 N/mm2) and rupture strength (1.03-0.74 N/mm2), decreased with increase in moisture content under lateral loading, but increased from 4.05 to 8.17 N/mm2, 4.15 to 8.45 N/mm2 and 2.6 to 6.3 N/mm2, respectively, as the moisture content increased in the above range, under longitudinal loading. The elasticity, toughness and stiffness moduli of the nut decreased (23-16.6 N/mm2, 0.615-0.525 J and 272.8-250 N/mm, respectively) with increase in moisture content under lateral loading, and increased (34.5-66.56 N/mm2, 0.508-0.69 J and 246-369 N/mm, respectively) with moisture content on longitudinal loading. On the above loading orientations, modulus of resilience increased from 0.166 to 0.355 J, and 0.255 to 0.576 J respectively, with moisture content. The properties were higher on the longitudinal than lateral axial loading. Second order polynomial equations relating these properties to moisture content were established.

Keywords: bioyield; compressive tests; modulus of elasticity; rupture; strength properties; Nigeria

Published: June 30, 2012  Show citation

ACS AIP APA ASA Harvard Chicago Chicago Notes IEEE ISO690 MLA NLM Turabian Vancouver
Aviara NA, Onuh OA, Ehiabhi SE. Influence of moisture content and loading orientation on some mechanical properties of Mucuna flagellipes nut. Res. Agr. Eng. 2012;58(2):66-72. doi: 10.17221/12/2011-RAE.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open full article

    References

    1. Abbott J.A., Massie D.R., 1995. Non-destructive dynamic force/deformation measurement of kiwifruit firmness (Actinidia deliciosa). Transactions of the ASAE, 38: 1809-1812. Go to original source...
    2. Abbott J.A., Lu R., 1996. Anisotropic mechanical properties of apples. Transactions of the ASAE, 39: 1451-1459. Go to original source...
    3. Ajayi I.A., Oderinde R.A., Kajogbola D.O., Uponi J.I., 2006. Oil content and fatty acid composition of some underutilized legumes from Nigeria. Food Chemistry, 99: 115-120. Go to original source...
    4. Anazodo U.G.N., 1982. Elastic and visco-elastic properties of agricultural products in relation to harvesting and postharvest processes. Agricultural Mechanization in Asia, Africa and Latin America, 13: 59-65, 70.
    5. Anazodo U.G.N., Norris E.R., 1981. Effects of genetic and cultural practices on the mechanical properties of corncobs. Journal of Agricultural Engineering Research, 26: 97-107. Go to original source...
    6. Anazodo U.G.N., Chikwendu S.C., 1983. Poisson's ratio and elastic modulus of radially compressive biomaterials - I: Small deformation approximation. Transactions of the ASAE, 26: 923-929. Go to original source...
    7. Anumnu A.I., 1990. Isolation, characterization and toxicity studies of Mucuna flagellipes haemagglutinin. [MSc. Thesis.] Nsukka, University of Nigeria.
    8. Aviara N.A., Ajikashile J.O., 2011. Effect of moisture content and loading orientation on some strength properties of conophor (Tetracarpidium conophorum) nut. Agricultural Engineering Research Journal, 1: 4-11.
    9. Aviara N.A., Gwandzang M.I., Haque M.A., 1999. Physical properties of guna seeds. Journal of Agricultural Engineering Research, 73: 105-111. Go to original source...
    10. Aviara N.A., Onuh O.A., Ehiabhi S.A., 2010. Physical properties of Mucuna flagellipes nuts. Seed Science and Biotechnology, 4: 59-68.
    11. Aviara N.A., Shittu S.K., Haque M.A., 2007. Physical properties of guna fruits relevant in bulk handling and mechanical processing. International Agrophysics, 21: 7-16.
    12. Cenkowski S., Zhang Q., Crerar W.J., 1995. Effect of sorption hysteresis on the mechanical behaviour of canola. Transactions of the ASAE, 38: 1455-1460. Go to original source...
    13. Dako D.Y., Hill D.C., 1977. Chemical and biological evaluation of Mucuna pruriens (utilis) beans. Nutrition Report International, 15: 239-244.
    14. Dinrifo R.R., Faborode M.O., 1993. Application of Hertz's theory of contact stresses to cocoa pod deformation. Journal of Agricultural Engineering and Technology, 1: 63-73.
    15. Ene-Obong A.N., Carnovale E., 1992. Nigerian soup condiments; traditional processing and potential as dietary fibre sources. Food Chain, 43: 29-34. Go to original source...
    16. Ezeike G.O.I., 1986. Quasi-static hardness and elastic properties of some tropical seed grains and tomato fruit. International Agrophysics, 2: 15-29.
    17. Haque M.A., Aviara N.A., Mamman E., Maunde F. A., 2001. Development and performance evaluation of a domestic orange juice extractor. Ife Journal of Technology, 10: 1-6.
    18. Iyayi E.A., Egharevba J.I., 1998. Biochemical evaluation of seeds of an under-utilized legume (Mucuna utilis). Nigerian Journal of Animal Production, 25: 40-45. Go to original source...
    19. Kang Y.S., Spillman C.K., Steel J.L., Chung D.S., 1995. Mechanical properties of wheat. Transactions of the ASAE, 38: 573-578. Go to original source...
    20. Khazaei J., Mann D.D., 2004. Effects of temperature and loading characteristics on mechanical and stress relaxation properties of sea buckthorn berries. Part 1. Compression tests. The CIGR Ejournal. Available at http://www.cigrjournal.org/index.php/Ejounral/article/view/516/510
    21. King M.J., 1996. Dynamic mechanical properties of frozen meat. Transactions of the ASAE, 39: 1469-1474. Go to original source...
    22. Mamman E., Umar B., Aviara N.A., 2005. Effect of moisture content and loading orientation on the mechanical properties of Balanites Aegyptiaca nuts. The CIGR Ejournal. Available at http://cigrjournal.org/index.php/Ejounral/article/view/602/596
    23. Manuwa S.I., Muhammad H.A., 2011. Effect of moisture content and compression axis on mechanical properties of shea kernel. Journal of Food Engineering, 105: 144-148. Go to original source...
    24. Maw B.W., Hung Y.C., Tollner E.W., Smittle D.A., Mullinix B.Y., 1996. Physical and mechanical properties of fresh and stored sweet onions. Transactions of the ASAE, 39: 633-637. Go to original source...
    25. Misra R.N., Young J.H., 1981. A model for predicting the effect of moisture content on the modulus of elasticity of soy beans. Transactions of the ASAE, 24: 1338-1341. Go to original source...
    26. Mohsenin N.N., 1986. Physical Properties of Plant and Animal Materials. New York, Gordon and Breach Press.
    27. Mohsenin N.N., Gohlich H., 1962. Techniques for determination of mechanical properties of fruits and vegetables as related to design and development of harvesting and processing machinery. Journal of Agricultural Engineering Research, 7: 300-315.
    28. Nwokocha L.M., Williams P.A., 2009. Isolation and rheological characterization of Mucuna flagellipes seed gum. Food Hydrocolloids, 23: 1394-1397. Go to original source...
    29. Oloso A.O., Clarke B., 1993. Some aspects of strength properties of cashew nuts. Journal of Agricultural Engineering Research, 55: 27-43. Go to original source...
    30. Onweluzo J.C., Obanu Z.A., Okwandu M.C., 2004. Potentials of gum from Detarium microcarpum (DM) and Mucuna flagellipes (MF) seeds as raw beef burger stabilizers. Plant Foods for Human Nutrition, 59: 137-141. Go to original source... Go to PubMed...
    31. Pappas G., Skinner E., Rao V.N.M., 1988. Effect of imposed strain and moisture content on some viscoelastic characteristics of cowpea (Vigna unguiculata). Journal of Agricultural Engineering Research, 39: 209-219. Go to original source...
    32. Rybinski W., Szot B., Rusinek R., Bocianowski J., 2009. Estimation of geometric and mechanical properties of seeds of Polish cultivars and lines representing selected species of pulse crops. International Agrophysics, 23: 257-267.
    33. Versteeg M.N., Amadji F., Eteka A., Koudokpon V., Manyong V.M., 1998. Collaboration increase in the use of Mucuna in production systems in Benin. In: Buckles D., Eteka A., Osiname O., Cdiba M., Galiano G. (eds), Cover Crops in West Africa Contributing to Sustainable Agriculture. Ottawa, International Development Research Centre: 33-43.
    34. Waananem K.M., Okos M.R., 1988. Failure properties of yellow dent corn kernels. Transactions of the ASAE, 31: 1816-1823, 1827. Go to original source...
    35. Zoerb G.C., Hall C.W., 1960. Some mechanical and rheological properties of grains. Journal of Agricultural Engineering Research, 5: 83-93.

    This is an open access article distributed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International (CC BY NC 4.0), which permits non-comercial use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.


    Return to the content