Res. Agr. Eng., 2014, 60(10):S37-S43 | DOI: 10.17221/32/2013-RAE

Performance parameters monitoring of the hydraulic system with bio-oilOriginal Paper

I. Janoško, T. Polonec, S. Lindák
Department of Transport and Handling, Faculty of Engineering, Slovak University of Agriculture in Nitra, Nitra, Slovak Republic

In environmental terms, hydraulic fluids used in the hydraulic system of municipal vehicles represent problems related to a potential leakage from the system into the environment and the subsequent contamination of groundwater and soil. More environment-friendly way is to use green hydraulic fluids that are biodegradable in accidents. This paper aims to investigate the possibilities of biodegradable oil application and its adaptation in the hydraulic systems of municipal vehicles by monitoring the impact of the bio-oil Mobil EAL 46 ESSO on the performance parameters as flow, efficiency, durability, etc. Hydraulic pump revolutions were measured using a non-contact sensor based on the principle of magnetic induction change. Method of tightness monitoring was used to achieve results for functionality and wear of the hydraulic system. During 600 h of the test period no significant deterioration of performance parameters was detected. Results are useful for companies involved in waste collection.

Keywords: Variopress 518; bio-fluid; working hydraulics; power parameters

Published: December 31, 2014  Show citation

ACS AIP APA ASA Harvard Chicago Chicago Notes IEEE ISO690 MLA NLM Turabian Vancouver
Janoško I, Polonec T, Lindák S. Performance parameters monitoring of the hydraulic system with bio-oil. Res. Agr. Eng. 2014;60(Special Issue):S37-43. doi: 10.17221/32/2013-RAE.
Download citation

References

  1. Jablonický J., Tkáč Z., Majdan R., Müllerová D., Hujo Ľ., Vozárová V., 2012. Hodnotenie vlastností biopalív a biomazív. [Evaluation of Biofuels and Biolubricants.] Nitra, SUA in Nitra: 143.
  2. Janoško I., Semetko J., Petrovič A., 2004. The degradable bio oils in municipal engineering. Czasopismo Techniczne 6-M/2004,45: 297-302.
  3. Janoško I., Šimor R., Čéri M., 2008. Advisement of the effect of bio-oil on the parameters of municipal vehicle hydraulic system. In: Advances in Automotive Engineering. VUT Brno, Czech Republic, Vol. 2: 130-135.
  4. Janoško I., Šimor R., Chrastina J., 2010. The bio-oil used in the hydraulic system of the vehicle for waste collection. Acta Techologica Agriculturae, 13: 103-108.
  5. Janoško I., Mojžiš M., Chrastina J., Polonec T., 2012. Testovanie výkonových parametrov hydraulickej sústavy komunalného vozidla s bioolejom. [Testing the performance parameters of the hydraulic system of municipal vehicle with bio-oil.] In: XXXVIII. Mezinárodní konference kateder dopravních, manipulačních, stavebních a země dělských strojů. Plzeň, Czech Republic: 41-46.
  6. Kosiba J., Tkáč Z., Majdan R., Hujo Ľ., 2012. The test of tractor hydrostatic pump by application of synthetic oil in the hydraulic circuit of tractor. In: SED 2012 - Science and higher education in function of sustainable development. Uzice, High Business-Technical School of Uzice: 1-7.
  7. Tkáč Z., Kročko V., Majdan R., Mikuš R., 2008. The laboratory testing device dedicated to evaluation of technical durability of hydrostatic pumps. In: Visnik Ľvivskogo nacionalnogo agrarnogo universitetu: agroinžinerni doslidženja No. 12. 2. Ľvov, Ľvivskij nacionaľnij agrarnij universitet: 747-753.

This is an open access article distributed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International (CC BY NC 4.0), which permits non-comercial use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.