Res. Agr. Eng., 2014, 60(10):S57-S65 | DOI: 10.17221/36/2013-RAE

Monitoring of conditions of agricultural machines' parts in operationOriginal Paper

P. Polák, R. Mikuš, V. Kročko
Department of Quality and Engineering Technologies, Faculty of Engineering, Slovak University of Agriculture in Nitra, Nitra, Slovak Republic

This contribution focuses on problems of monitoring the runout of tractor diesel motor parts used in agricultural operation. Crankshafts from the agricultural tractors of type Zetor 6911 are used as samples for measuring the runout and circularity. The first sample of the crankshaft is loaded in the tractor used in livestock production, and the second one is used in vegetable production. Measured values of the runout and circularity of both samples are evaluated by tables and polar diagrams. Results of the experiment show the amount of runout and the following wear of agricultural machine parts in different operating conditions of agricultural production.

Keywords: crankshaft; deviation, circularity; runout measurement; wear

Published: December 31, 2014  Show citation

ACS AIP APA ASA Harvard Chicago Chicago Notes IEEE ISO690 MLA NLM Turabian Vancouver
Polák P, Mikuš R, Kročko V. Monitoring of conditions of agricultural machines' parts in operation. Res. Agr. Eng. 2014;60(Special Issue):S57-65. doi: 10.17221/36/2013-RAE.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open full article

    References

    1. Drlička R., Mikuš R., 2007. Vývoj ekonomiky opráv poľnohospodárskych strojov/Trend in agricultural machines repair costs. In: 12th International Scientific Conference accompanying event of International Machinery Fair 2008. Nitra, SUA in Nitra, 197-201. Available at http://www.slpk.sk/eldo/2007/025_07/46.pdf
    2. Giakoumis E.G., Rakopoulos C.D., Dimaratos M., 2007. Study of crankshaft torsional deformation under steady-state and transient operation of turbocharged diesel engines. Journal of Multi-Body Dynamics, 222: 17-30. Go to original source...
    3. Gir m an V., 2011. Kovové mater iály automobilových konštrukcií - I. Motor a jeho súčasti. [Meta l m at e r i a l s o f au t o m o b i l e co n s t r u c t i o n s - I. Engine and its components.] In: Materials Engineer/ Materiálový inžinier. Available at http://www.materialing.com/materialy_motorov_castI
    4. Hajdák H., 2008. Opotrebenie vačkových mechanizmov. [Wear of Cam Mechanisms.] Nitra, SUA in Nitra: 67.
    5. Hlavňa V., Kukuča P., Isteník R., Labuda R., Liščák Š., 2000. Dopravný prostriedok - jeho motor. [Vehicle - its Engine.] 1st Ed. Žilina, University of Žilina: 442.
    6. Kotus M., Žitňanský J., Petrík M., 2002. Optimalizácia technologického postupu výroby strojovej súčiastky. [Optimization of technological procedure of machine part production.] In: Kvalita a spoľahlivosť strojov. [The Quality and Reliability of the Machines.] Nitra, SUA in Nitra: 122-124.
    7. Kováč I., Žarnovský J., Žitňanský J., 2005. Vrstvy odolné proti opotrebeniu. [Wear-resistant layers.] In: New Trends in Technology System Operation, 20-21 October 2005. Košice, Technical University: 160-161.
    8. Kročko V., Mikuš R., Drlička R., 2007. Trends of agricultural machinery in Slovakia. In: Proceedings of the 5th Research and Development Conference of Central and Eastern European Institutes of Agricultural Engineering, June 20-24, 2007. Kiev, National Agricultural University of Ukrajine: 61-67.
    9. Korenko M., Žitňanský J., Drlička R., Kováč I., 2010. Základy strojárskych technológií. [Basics of Engineering Technologies.], 1st Ed. Nitra, SUA in Nitra: 118.
    10. Líška E.. Bajla J., Candráková E., Franák J., Hrubý. D., Ílleš L., Korenko M., Nozdrovický L., Pospíšil R.. Špánik F., Žembery J., 2008. Všeobecná rastlinná výroba. [General Crop Production.] 1st Ed. Nitra, SUA in Nitra: 421.
    11. Poničan J., Korenko M., 2008. Stroje pre rastlinnú výrobu: stroje na zber krmovín, zrnín, ľanu, zemiakov, zeleniny a ovocia. [Machines for Crop Production: Machines for Harvesting Forage Crops, Grains, Flax, Potatoes, Vegetables and Fruits.] 1st Ed.. Nitra, SUA in Nitra: 248.
    12. Páltik J., Findura P., Polc M., 2007. Poľnohospodárske stroje: skúšanie, konštrukcia, použitie. I. časť. [Agricultural Machines: Testing, Construction, Usage. Part 1.] 1st Ed. Nitra, SUA in Nitra: 190.
    13. Zetor Brno, 1978. Dílenská příručka traktorů Zetor 6911. [Service Manual of Tractors Zetor 6911.] 1st Ed. Brno, Zetor: 200.

    This is an open access article distributed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International (CC BY NC 4.0), which permits non-comercial use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.


    Return to the content