Res. Agr. Eng., 2017, 63(3):106-114 | DOI: 10.17221/79/2015-RAE

Research on wear resistance of poly-component composite materialsOriginal Paper

Miroslav Müller*, Jiøí Kejval
Department of Material Science and Manufacturing Technology, Faculty of Engineering, Czech University of Life Sciences Prague, Prague Czech Republic

The paper deals with the testing of composite materials based on corundum, silicon carbide and glass. The object of the experiments was a particle polymeric composite, whose continuous phase was in the form of a two-component epoxy resin and a discontinuous phase (reinforcing particles) of corundum, silicon carbide and glass of a specific particle size from 4.5 to 260 µm. The research was focused on the evaluation of abrasive wear resistance and hardness of the tested materials. A considerable improvement of the values obtained at measuring the abrasive wear resistance was reached at hybrid composite materials filled with three different components, when 98% improvement was reached compared to the epoxy resin without the filler. The hardness increased up to 35% by adding the filler. The particle size influenced properties of the polymeric composite as the particles of larger sizes bring a positive influence on the wear resistance and the hardness HBW 10/250/30.

Keywords: hardness; mechanical properties; polymeric composite; strength; testing, wear

Published: September 30, 2017  Show citation

ACS AIP APA ASA Harvard Chicago Chicago Notes IEEE ISO690 MLA NLM Turabian Vancouver
Müller M, Kejval J. Research on wear resistance of poly-component composite materials. Res. Agr. Eng. 2017;63(3):106-114. doi: 10.17221/79/2015-RAE.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open full article

    References

    1. Basavarajappa S., Joshi A.G., Arun K., Kumar A.P., Kumar M.P. (2010): Three-body abrasive wear behaviour of polymer matrix composites filled with SiC particles. PolymerPlastics Technology and Engineering, 14: 8-12. Go to original source...
    2. Chang J.J., Yeih W.C. (2001): The effect of particle shape on bond strength improvement of epoxy particle coating composites. Journal of Marine Science and Technology, 9: 153-160. Go to original source...
    3. Farrah Noor Ahmed, Mariatti Jaafar, Samayamutthirian Palaniandy, Khairun Azizi Mohd Azizli (2008): Effect of particle shape of silica mineral on the properties of epoxy composites. Composites Science and Technology, 68: 346-353. Go to original source...
    4. Friedrich K., Fakirov S., Zhang Z. (2005): Polymer composites: from nano-to macro-scale. New York: Springer. Go to original source...
    5. Fu S., Feng X., Luke B., Mai Y.W. (2008): Effects of particle size, particle/matrix interface adhesion and particle loading on mechanical properties of particulate-polymer composites. Composites: Part B, 39: 933-961. Go to original source...
    6. Jia X., Ling R. (2007): Two-body free-abrasive wear of polyethylene, nylon 1010, expoxy and polyuretane coating. Tribology International, 40: 1276-1283. Go to original source...
    7. Karoonboonyanan S., Salokhe Vilas M., Niranatlumpong P. (2007): Wear resistance of thermally sprayed rotary tiller blades. Wear, 263: 604-608. Go to original source...
    8. Müller M., Chotìborský R., Valá¹ek P., Hloch S. (2013): Unusual possibility of wear resistance increase research in the sphere of soil cultivation. Tehnicki Vjesnik-Technical Gazette, 20: 641-646.
    9. Palabilyik M., Bahadur S. (2002): Tribological studies of polyamide 6 and high-density polyethylene blends filled with PTFE and copper oxide and reinforced with short glass fibers. Wear, 253: 369-376. Go to original source...
    10. Palabilyik M., Bahadur S. (2000): Mechanical and tribological properties of polyamide 6 and high density polyethylene polyblends with and without compatibilizer. Wear, 246: 149-158. Go to original source...
    11. Ravi Kumar B.N., Suresha B., Venkataramareddy M. (2009): Effect of particulate fillers on mechanical and abrasive wear behaviour of polyamide 66/polypropylene nanocomposites. Materials and Design, 30: 3852-3858. Go to original source...
    12. Suresha B., Ravi Kumar B.N. (2010): Two-body abrasive wear behavior of particulate filled polyamide66/polypropylene nanocomposites. Journal of Applied Polymer Science, 119: 2292-2301. Go to original source...
    13. Valá¹ek P. (2015): Polymeric microparticles composites with waste EPDM rubber powder. Agronomy Research, 13: 723-731.
    14. Valá¹ek P., Müller M., Hloch S. (2015): Recycling of corundum particles - two-body abrasive wear of polymeric composite based on waste. Tehnicki Vjesnik-Technical Gazette, 22: 567-572. Go to original source...

    This is an open access article distributed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International (CC BY NC 4.0), which permits non-comercial use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.


    Return to the content