Res. Agr. Eng., 2017, 63(3):128-135 | DOI: 10.17221/64/2015-RAE

A novel method for the quantification of interfacial tomato stresses during transportationOriginal Paper

Wynand Jacobus van der Merwe Steyn
Depertment of Civil Engineering, Faulty of Engineering, Built Environment and IT, University of Pretoria, Lynnwood road, Hatfield, South Africa

Transportation of tomatoes on farm and market roads causes interfacial stresses of tomatoes due to truck dynamics as affected by road and transportation conditions. These stresses may affect the shelf-life of tomatoes if they are high enough to cause damage to the fruit. This paper describes a novel method for the in situ measurement of the stresses during actual transportation of tomatoes, providing the producer information that can assist in taking decisions regarding the use of alternative routes, maintenance of existing routes or changes in packing to prevent excessive stresses onto tomatoes. The process involves measurement of the stresses using a stress-sensor that is recording the interfacial stresses continuously during transportation. These stresses can be correlated to road conditions (quantified through standard road-roughness statistics) and used to subject tomatoes in laboratory conditions to similar stresses to study shelf-life effects of transportation stresses. The paper focuses on the measurement process and first-order data analysis, and excludes a detailed study on the physiological effects of the measured stresses on tomatoes.

Keywords: transportation related stress; shelf-life

Published: September 30, 2017  Show citation

ACS AIP APA ASA Harvard Chicago Chicago Notes IEEE ISO690 MLA NLM Turabian Vancouver
Steyn WJVDM. A novel method for the quantification of interfacial tomato stresses during transportation. Res. Agr. Eng. 2017;63(3):128-135. doi: 10.17221/64/2015-RAE.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open full article

    References

    1. Batu A. (1998): Some Factors affecting on determination and measurement of tomato firmness. Turkish Journal of Agriculture and Forestry, 22: 411-418.
    2. Chesson J.H., O'Brien M. (1971): Analysis of mechanical vibration of fruit during transportation. Transactions of the American Society of Agricultural Engineering, 14: 241-243. Go to original source...
    3. Fischer D., Craig W.L., Watada A.E., Douglas W., Ashby B.H. (1992): Simulated in-transit vibration damage to packaged fresh market grapes and strawberries. Applied Engineering in Agriculture, 8: 363-366. Go to original source...
    4. Gillespie T.D. (1992): Fundamentals of vehicle dynamics. Society for Automotive Engineers. Warrendale, Pennsylvania, USA. Go to original source...
    5. Jackman R.L., Marangoni A.G., Stanley D.W. (1990): Measurement of tomato fruit firmness. Hortscience, 25: 781-783. Go to original source...
    6. Jarimopas B., Singh S.P., Saengnil W. (2005): Measurement and analysis of truck transport vibration levels and damage to packaged tangerines during transit. Packaging Technology and Science, 18: 179-188. Go to original source...
    7. Kannemeyer L. (2014): Road network condition and MTF budget - Provincial and National. 27th Road Pavement Forum meeting, Umhlanga, KwazuluNatal, South Africa.
    8. Mutari A., Debbie R. (2011): The effects of postharvest handling and storage temperature on the quality and shelf of tomato. African Journal of Food Science, 5: 446-452.
    9. O'Brien M., Pearl R.C., Vilas E.P. Jr, Driesbach R.L. (1969): The magnitude and effect of in-transit vibration damage of fruits and vegetables on processing quality and yield. Transactions of the American Society of Agricultural Engineering, 12: 452-455. Go to original source...
    10. Sayers M.W., Gillespie T.D., Paterson W.D.O. (1986): Guidelines for conducting and calibrating road roughness measurements. Washington, D.C., USA, World Bank.
    11. Singh A., Singh Y. (1992): Effects of vibration on the quality of tomatoes. Agricultural Mechanization in Asia, Africa and Latin America, 23: 70-72.
    12. Steyn W.J.vdM. 2013. Freight-Truck-Pavement Interaction, Logistics, & Economics: Final Phase 1 Report (Tasks 7-8). UCPRC-RR-2013-08. Final report. August 2013. Sacramento, USA, Caltrans DOTP.
    13. Steyn W.J.vdM., Coetzer S. (2014): ZZ2 Route evaluation and produce damage - Final report. UP/WJVDMS/07/2014, Pretoria, South Africa.
    14. Steyn W.J.vdM., Bean W.L, Pretorius C.J., Van der Walt G.L. (2012): The potential effects of bad roads on transported cargo. 8th State of LogisticsTM survey for South Africa. CSIR, Pretoria, South Africa: 79-86.
    15. Steyn W.J.vdM., du Plessis L, Viljoen N., van Heerden Q., Mashoko L., van Dyk E., Popescu L. (2014): Freight-truckpavement interaction, logistics, & economics: final executive summary report. UCPRC-SR-2014-01. January 2014. Sacramento, USA, Caltrans DOTP.
    16. Steyn W.J.vdM., Nokes B., du Plessis L., Agacer R., Burmas N., Popescu L. (2015): Evaluation of the effect of rural road condition on agricultural produce transportation. Paper

    This is an open access article distributed under the terms of the Creative Commons Attribution-NonCommercial 4.0 International (CC BY NC 4.0), which permits non-comercial use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.


    Return to the content